Difference between revisions of "HACCESS"

imported>Parag0n
(Created page with "Hackspace Access Control/Card Entry Sentry System (HACCESS) is a series of access control nodes spread around the hackspace, used for access to machines that require special t...")
 
imported>Jmac
m (Recommend for cleanup. Not sure if any of this is current.)
 
(11 intermediate revisions by one other user not shown)
Line 1: Line 1:
Hackspace Access Control/Card Entry Sentry System (HACCESS) is a series of access control nodes spread around the hackspace, used for access to machines that require special training or an induction.
+
[[File:Haccess.png|300px|thumb|right]]
 +
Hackspace Access Control/Card Entry Sentry System (HACCESS) is a series of access control nodes spread around the hackspace, used for access to machines that require special training or an induction.  And also to turn the coffee pot off.
  
''Basic Design''
+
[https://github.com/thinkl33t/HACCESS GitHub Link]
* RC522 RFID reader
+
 
* 20x2 Backlit LCD
+
==Usage==
* Comms, any of:
+
The plan is to eventually to replace the isolation switches on the benches and the kitchen worktop with HACCESS nodes, so that we can have a HACKSPACE OFF button by the door, and monitor what is on / off from the interweb.  The user will come up to a device they want to use and press the green button.  If the device needs RFID, it will ask for it to be scanned, if not it turns on.  Each press of the green button while authenticated adds 30 minutes to the timer, so you go to the bench, press green twice for an hour.  If its getting close to the end of the timer, the beeper starts beeping, and the user can press it again for another 30 minutes.
* ENC28J60 Ethernet
+
 
* CAN
+
Ideally, the HACCESS nodes would also let us mark people as trained.  So a trainer presses a blue button, scans their RFID, then scan someone elses.  The second user now has access to that machine.
* nRF24L01 Wireless Module
+
 
* RS485
+
<parag0n> Ooooh the buzzer could play the countdown tune and flash its screen towards the end of the session.
 +
 
 +
==Basic Design==
 +
[[File:HACCESSv1.png|300px|thumb|right]]
 +
* FM1701 RFID reader
 +
* 5110 LCD Unit
 +
* 3 buttons
 +
* Buzzer for alerting
 +
* esp8266 WiFi comms
 +
* 2x Status LEDs
 
* Output Devices, any of:
 
* Output Devices, any of:
* Opto Coupler
+
** Opto Coupler
* FET
+
** FET
* Relay
+
** Relay
* Flash memory, for caching access database
+
** SSR
 +
* Sized to fit in a regular single pattress, with a laser cut front
 +
 
 +
 
 +
[[Category:Cleanup 2015]]

Latest revision as of 22:59, 7 September 2015

Haccess.png

Hackspace Access Control/Card Entry Sentry System (HACCESS) is a series of access control nodes spread around the hackspace, used for access to machines that require special training or an induction. And also to turn the coffee pot off.

GitHub Link

Usage

The plan is to eventually to replace the isolation switches on the benches and the kitchen worktop with HACCESS nodes, so that we can have a HACKSPACE OFF button by the door, and monitor what is on / off from the interweb. The user will come up to a device they want to use and press the green button. If the device needs RFID, it will ask for it to be scanned, if not it turns on. Each press of the green button while authenticated adds 30 minutes to the timer, so you go to the bench, press green twice for an hour. If its getting close to the end of the timer, the beeper starts beeping, and the user can press it again for another 30 minutes.

Ideally, the HACCESS nodes would also let us mark people as trained. So a trainer presses a blue button, scans their RFID, then scan someone elses. The second user now has access to that machine.

<parag0n> Ooooh the buzzer could play the countdown tune and flash its screen towards the end of the session.

Basic Design

HACCESSv1.png
  • FM1701 RFID reader
  • 5110 LCD Unit
  • 3 buttons
  • Buzzer for alerting
  • esp8266 WiFi comms
  • 2x Status LEDs
  • Output Devices, any of:
    • Opto Coupler
    • FET
    • Relay
    • SSR
  • Sized to fit in a regular single pattress, with a laser cut front