|<categorytree mode=pages>Laser Cutter (Orange)</categorytree>|
The Orange Laser Cutter is usable by members from the week beginning 28th of September 2015. You must have had an induction on the Orange Laser, or a Conversion Class to use it.
- A2-ish Bed size, 600mm x 400mm
- 60W Laser Tube (1250mm long / 55mm diameter)
- Awesome Extraction
- Air Assist
- Red-dot laser for bounds checking
- Smart cooling
- Rise-and-fall bed, Super useful for engraving stuff on stuff
- [TBC] Rotary Axis
|If the laser cutter does anything out of the ordinary please make sure it's reported to a laser maintainer. If the response is "please put the out of order sign on the cutter" then do that. DO NOT ATTEMPT TO FIX THE CUTTER YOURSELF. If it is clearly not functioning, put the out of order sign on it and then report it. We will fix it as soon as possible.|
- 1 Status
- 2 Software
- 3 Cutting
Visicut is the software that converts vector files into the code that drives the laser cutter. You can download Visicut Here.
If you are on OSX, you may need to download the Platform Independant ZIP instead of the OSX Release. If you are a software developer with experience of OSX packaging, Visicut are looking for help with this issue!
On first run, Visicut will ask if you want to download settings. You do, just select Manchester, UK: Hackspace from the list and Visicut will automatically install the latest settings for our laser cutter. You can use this same method to reset your settings back to the default, under the menu item Options > Settings > Download Recommended Settings. You may get an error message, error importing settings. If this occurs, just close and reopen Visicut for the settings to apply.
For vector editing and manipulation, we suggest people use Inkscape. It is a free and powerful vector editing package, and integrates well with Visicut. It can be downloaded here.
Once you have Visicut and Inkscape installed, and have run Inkscape at least once (so it creates its folders in your home drive), You can install the Inkscape addon for Visicut by clicking Extras > Install Inkscape Extension in Visicut. Close and reopen Inkscape and you should have new options for sending vectors directly to Visicut.
Before lasering / cutting the main thing to be aware of is overheating
- The laser cutter has a inbuilt water pump / cooler which needs to be running
- There's also an extraction pipe for getting rid of the fumes
|The water pump must be running before cutting|
Otherwise you may cause damage to the Laser Cutter This can be verified by checking the red light is on in the water cooling chamber
|After Cutting make sure to leave the plugged in and turned on for at least 5 mins
to allow the water pump to cool.
|Make sure to watch over the cutter as it's cutting.|
Rule 0 - don't be on fire
In the event something goes wrong
- Mail the mailing list with a short description of the problem
- What you were trying to do
- What you expected to happen
- What happened instead
- Put the out of order sign on the top of the cutter
- Let the cutter cool down for 5 mins before turning off
In the event of fire / emergency
- There is an emergency stop button on the top panel that is functional. Opening the lid will stop the laser from firing however.
- If you can smother the fire in-place using a piece of stock, do so.
- If you cant smother it in place, put it on the floor and try to stomp it out.
- If you cant do either of these. Leave the space immediately, and call 999. The address is Wellington House, Pollard Street, Manchester, M40 7FS
- The orange button / joystick in the center is used by nudging left and right for selecting menu entries
- The red button is a 'back' button in menus.
Making the Cut
- First place some money in the pot for using the cutter
- There is a book for keeping track of usage of the laser so make sure to use this to track any IOUs. Time log is in the front of the book, Money log is in the back
- Turn on the chiller, this can be found to the left of the laser cutter on the floor
Positioning the part
With the orange laser the only thing to worry about is the Z axis. There is a switch on the right hand side of the machine that can be used to lower or raise the main bed of the machine. It's a bit slow, but make sure not to crash the bed into the laser head, since there isn't a limit switch installed
There is a small wooden guide inside the machine that can be used to position / zero the height against the bed (the default position). This goes in between the bed and the left-hand part of the laser cutter, as in the following photo:
- For cutting materials up to 6mm it's best to have the z height set to bed level.
- For cutting materials over 6mm, try to keep the z height 6mm into the material. Multiple passes may be needed.
- For engraving set the focal point to the height of the material by placing the guide on top of it.
- If you want crisp engraving on thick stock, you will need to do a 2-stage engrave / cut with the focal point initially set to the top of your material, and then re-set to the correct height for your cut.
- Place the part into the cutter
- When cutting try to leave the cover on both sides of the material, or if only one side the bottom (not the top)
Test the Laser positioning
Next we're going to do a boundary test to make sure the laser cutter is working on the area we think it's going to
- Click Execute in Visicut
- Wait for the small LCD on the Cutter it to say the file name
- Nudge the center orange button to the right to select boundary
- Press the center orange button, this will cause the red laser to trace the box outline of where the cut will be done on the material
- This can be done with the lid open to assist in placing your part, however watch for pinch hazards.
- Also an indication of the size of the boundary area will be shown on the LCD
- Press the orange button again to go back to the main menu
Do the cut
At this stage you should now be ready to do the cut for real
- Make sure the lid is closed, The laser wont fire with it open.
- The LCD should show Run on the screen
- Press the orange button to start the run job
- After making any kind of cut, make sure to run the chiller for at least 5 mins, and ensure the temperature displayed is below 25, otherwise bad things may happen